- Unlike conventional mixed flow type pumps, the casing does not have a guide vane.
- The impeller is of non-clogging type and number of vanes are minimized.
Safe operation over a wide range of heads
- The pump maintains high efficiency over a wide range of heads and is designed not to operate excessively beyond the maximum output of the prime mover.
Simple maintenance and inspection
- The pump is light, compact and of simple construction.
- The casing and suction bend have windows to facilitate interior inspection.
- The bearings are grease (or oil) lubricated and are not in contact with the water. They are, therefore, extremely durable.
- Non-flushing mechanical seal is standard so that fresh water is not requested.
- Pressurized fresh water supply ports are provided at the shaft seal to extend the life of the sleeve and gland packing.
- The suction liner which forms the impeller shroud is made of wear resistant material and can be replaced・simply by removing the suction bend.
- The gap between impeller and suction liner can be adjusted from outside by turning the bearing nut on top of the main shaft. This eliminates the need to dismantle the pump.
- Sewage Treatment Plant
FCD450 / ASTM Gr65-45-12
SCS6 / ASTM CA6NM
SUS420J2 / ASTM A318 S42000
0℃ ~ 80℃
||Ball Bearing / Roller Bearing
||Grease / Oil
||Non-flushing Mechanical Seal
||400mm ~ 1,500mm
||12m3/min ~ 320m3/min
||40m ~ 150m
DS-VV (High Head)
- Brand: Kubota
- Product Code: DS-VV_HL
- Availability: 2-3 Days
- Ex Tax: $0.00